HOURS: 8-6 M-TH, 8-5 F






Join our mailing list!





  Home > Gauges / Data Aquisition >

PLX Devices - Kiwi 2 Bluetooth
PLX Devices Kiwi 2 Bluetooth


 
Alternative Views:


Price: $89.99

Part Number: PLX001
Qty:

Description
 

Overview:

Kiwi 2 Bluetooth is a plug and play automotive tool that connects to the onboard diagnostic port (OBDII / CAN). This tool communicates and retrieves information from your car's computer and wirelessly transmits to any Android, Smybian, N9, Linux, or PC. It is compatible with 1996 and later vehicles and installs in seconds. The Kiwi 2 Bluetooth can efficiently monitor a vehicle's MPG, data log engine parameters, read/reset engine trouble codes and monitor real time engine performance. Simply connect your device to the Kiwi 2 Bluetooth through a Bluetooth connection, and launch the compatible app of your choice to obtain vital information about your vehicle.

The Kiwi 2 Bluetooth includes several improvements over the first generation award winning Kiwi 1 Bluetooth. It now comes with a sleek new design and is 0.25 inches thinner. The cable length has been reduced from 6 feet to 3 feet, making for a cleaner permanent installation. It incorporates an elm327 compatible interface and it works with ISO9141, VPW, PWM, and CAN protocols.

The Kiwi 2 Bluetooth incorporates a new advanced power saving circuit, designed to shut off power to essential functions of the unit allowing the Kiwi 2 Bluetooth to be permanently installed in your vehicle without draining your vehicle's battery. After 5 minutes of inactivity, the Kiwi 2 Bluetooth automatically enters a low power sleep mode. To turn the unit back on, a simple press of the soft switch wakes the device back up.

The Kiwi 2 Bluetooth includes an 8 pin port on the back designed to be mated with the PLX iMFD Adapter. This allows you to connect high performance aftermarket sensors such as wideband air/fuel ratio, exhaust gas temperature, vacuum/boost, air intake temperature, fluid pressure and fluid temperature and view on your Android mobile device. This solution is desired for applications where vehicles do not support certain sensors and/or the car's computer does not report them. With the PLX iMFD Adapter attached, the best of both worlds of fully plug and play OBD2 / CAN data as well as high performance aftermarket sensors can be obtained.

  • Physical Dimensions: 1.25 x 2.72 x 0.60
  • Power Consumption: 1.24 Watts (Typical), 0.1Watt(Sleep)
  • Power Saving: Intelligent low power sleep circuitry
  • OBDII/CAN Protocols: ISO-9141, VPW, PWM, KWP 2000, 11Bit CAN, 29Bit CAN
  • Compatible Vehicles: 1996 and later vehicles
  • Operating Temperature: 0 - 80 Degress Celsius
  • Operating Voltage: 10 - 18V
  • Wireless Standard: Bluetooth versions 2.1/2.0/1.2/1.1
  • Range: ~50ft line of sight
  • Enclosure: Automotive Grade Plastic
  • Additional Sensor Support: Compatible with PLX iMFD Daisy Chain Adapter

Share your knowledge of this product. Be the first to write a review »