HOURS: 8-6 M-TH, 8-5 F

Join our mailing list!

  Home > Exterior / Aero >

BimmerWorld - E92 M3 Carbon Splitter/Undertray
BimmerWorld E92 M3 Carbon Splitter/Undertray

Alternative Views:

Price: $1,999.99

Part Number: 0053



This piece is a direct bolt-on to your factory bumper and directs airflow perfectly into the factory flat-bottom aero parts on your car for maximum downforce. We have extended the front slightly as well as the sides (about 1.75" per side) to provide greatly increased area for maximum downforce, unlike the factory GT4 part and the many copies on the market of that design which is a mild street/track part. Front downforce is hard to create on a sedan-based car and our aero components are fully focused on performance and track function.

The BimmerWorld E92 M3 Carbon Splitter/Undertray was created to balance the huge downforce levels generated, even at low speeds, from our Carbon Race Wing. This splitter is intended as a track/race part and reduces ground clearance - this part can be used on the street, but care must be taken and ride height should be a consideration.

Effective - This splitter is not the typical GT4 factory copy. To make more downforce for true performance instead of a semi-cosmetic part, we have maximized the width and undertray sections. Maximum extension provides high levels of downforce, while an integrated undertray maximizes efficiency by shaping and transitioning air under the car into the factory plastic underpinnings for a flatbottom effect.

Lightweight - This carbon unit with hardware weighs in at about 8# complete. Reducing weight in front of the front tires has a huge affect on handling.

Durable - Made to lower the front of the car about 0.5" (very slightly lower than the felt blocks that stick down in front of your front tires), this splitter is a good compromise between functionality and form. This height typically withstands off-track excursions without major damage.

High Quality - The undertray is constructed as a honeycomb core composite by a manufacturer rooted in ALMS, Rolex, and other race parts. These parts will take a beating!

Repairable - In the event of damage, this piece can be repaired (send picture for quote).

The BimmerWorld E92 M3 Carbon Splitter is available with or without integrated ducts. Ducted models include two openings that terminate in 3" tubes to attach your brake duct hoses to for proper track brake cooling. The non-ducted model is perfect for street use or racecars that have relocated or modified the engine and transmission ducts through use of our Carbon Bumper Ducts.

Some pictures include optional whiskers or dive planes.

Made in USA

Share your knowledge of this product. Be the first to write a review »