HOURS: 8-6 M-TH, 8-5 F






Join our mailing list!





  Home > Drivetrain > Clutch / Flywheel >

BimmerWorld - "Junior Puck" Clutch Stop
BimmerWorld "Junior Puck" Clutch Stop


 
Alternative Views:


Price: $19.99

Part Number: 0309
Qty:

Description
 

When shifting, you press your clutch pedal to the engagement point, the clutch grabs, and you shift. If you are pressing your pedal significantly past this point, you are wasting time not accelerating (in some racecars, this can be 3-4 MPH on a given straight), and worst case you could be damaging your clutch. The BimmerWorld "Junior Puck" Clutch Stop removes the excess clutch pedal travel for faster, more precise shifts.

What makes the BimmerWorld stop different, besides being snatched from some young Jagr protege in Eastern Europe?

  • First, the hockey puck was specifically chosen to provide a larger diameter face to stop your clutch lever, which due to plastic construction and rubber bushings, can have quite a bit of flex allowing it to be pushed around smaller stops. And when you hit the stop in anger, the 90 Shore A material gives a very satisfying thud - not some tinky, lightweight clink.
  • Second, its longer. The BimmerWorld Clutch Stop still works perfectly with your stock or standard performance clutch, but becomes critical for high-end clutches and race clutch/flywheels which have much less travel before over-extension.

Fits all E28, E30, E34, E36, E39, E46, Z3, and Z8 cars with manual transmissions. (NOTE: some later E36 and all E46 BMWs require the clutch to be partially or fully depressed in order to start the vehicle. Because of the nature of the clutch stop, it does not allow the clutch to be depressed fully to the floor, and may not activate the switch to allow the car to start without a simple sensor modification.)

Hockey puck made in Slovakia - product machined and assembled in the USA


Share your knowledge of this product. Be the first to write a review »