HOURS: 8-6 M-TH, 8-5 F

Join our mailing list!

  Home > Suspension / Steering > Springs, Shocks and Coilovers >

Ground Control - E36 Coilover Completion Kit (Ohlins, MCS, JRZ, AST, Etc.)
Ground Control E36 Coilover Completion Kit (For Ohlins, MCS, JRZ, AST, Etc.)

Price: $799.99

Part Number: 2025.89

Brands of Struts:

Front Spring Rates (lb/in):

Hybrid Perches:

Platform Application :

Rear Shock Mounts:

Rear Spring Rate (lb/in):

Rear Weight Jacks:

Spring Diameter:


Ground Control - Coilover Completion Kit (For Ohlins, MCS, JRZ, AST, Etc.)

Fits BMW E36 (All Models)


1 Pair Ground Control Racing Camber/Caster Plates

  • Ground Control Racing Camber/Caster Plates - More camber adjustment than stock, caster adjustment, aircraft bearings, engraved with calibrated degrees, with stainless steel reinforcement. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product. The stainless steel reinforcement prevents electrolysis between the steel fender and the aluminum camber plate.
  • Camber and caster are separately adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow fast, repeatable alignment changes at the track.
  • The Ground Control camber plates feature two sets of bearings, a proprietary bearing, made to GC specs by Aurora in the USA, which allows for articulation of the shock shaft. This spherical bearing is very understressed, as the Ground Control design does NOT support the weight of the car on the spherical bearing. Instead, the weight of the car is supported by a completely separate articulating needle bearing, which is also manufactured for Ground Control in the USA!

4 Eibach ERS springs, any racing spring rate

  • Eibach Springs - Any spring rate is available. Eibach springs are made on German machines both in the USA and in Germany, however all Eibach springs have a lifetime guarantee against sagging, rate change, or any manufacturing or material failure. Lifetime guarantee. Compare!

4 Ground Control bump stops (made in Germany)

  • Ground Control Bump Stops - We do not just ask you to reuse your stock bump. The stock bump stop is designed for stock suspension; we provide a bump stop designed to work with our suspension. These are soft foam, same quality as OE BMW parts, but made to our specs in Germany. GC’s race bump stops are even different than GC’s street bump stops.

2 Rear ride height adjusters.

  • Ground Control Rear Ride Height Adjustment Kit - Billet aluminum threaded adjusters bolt on top of the rear control arm. The E36 M3 has a larger diameter rear axle than the standard e36, so it is necessary for clearance to not have any portion of the adjuster below the control arm.

These kits are intentionally equipped with a rigid camber/caster plate design for on-track applications. Because of this feature, some noise may be transmitted from strut shafts, sway bar links, tires, brakes, springs, wheel bearings, road surfaces, etc into the chassis.

Note: All Ground Control products carry a lifetime guarantee against defects when installed and maintained correctly. We strongly recommend that all of our products be installed by a competent, qualified mechanic.

Note: Please select what brand struts/shocks you are running. Also please select Spring Diameter (I.D)

Note: Please specify if you would like to add Hybrid Spring Perches for 2.5" Springs Only

Note: Please specify desired Spring Rates & Vehicle Application in Notes section during checkout**

Share your knowledge of this product. Be the first to write a review »